LONDON / MAIN SERVICE
After Builders Cleaning
Detailed post-construction cleaning for homes, offices and renovated properties, removing building dust, fine debris and residue after building or refurbishment work.
- Removal of construction dust and fine debris
- Kitchens, bathrooms, floors, windows and finished surfaces
- Flexible appointments after renovations and refurbishments
POST-CONSTRUCTION CLEANING
When after builders cleaning is the right next step.
Make sure the property is ready for cleaning
- Building work is fully completed
- Tools and construction waste are removed
- Water and electricity are available
- All required rooms are safely accessible
After builders cleaning is suitable once renovation, decorating or construction work has finished and the property needs detailed removal of fine dust, marks and settled residue.
The cleaning plan should identify the completed rooms, finished surfaces, glazing, floors, cupboards and fixtures that are ready to be cleaned.
Confirming the floor area, access route and remaining level of building dust helps determine the team size, equipment and working time required.
Active construction work, rubble removal, paint correction, repairs and unfinished surfaces are not automatically included and should be discussed separately.
SCOPE / USEFUL BOUNDARIES
Compare the written scope, not the headline.
Included when agreed
- Fine dust removal from agreed reachable surfaces
- Cleaning of completed rooms
- Kitchen and sanitary fittings where installed
- Suitable floor finish work
Not implied
- Active building work
- Hazardous or specialist waste
- Paint, adhesive or damage removal without assessment
AFTER BUILDERS CLEANING PRICES
Guide prices based on property size.
The final quotation depends on the amount of construction dust, property condition, completed rooms and the level of detailing required after the building work.
- Light renovation residue
- Kitchen & bathroom included
- Floors and internal glazing
- Most requested option
- Detailed dust removal
- Cupboards & finished surfaces
- Whole property cleaning
- Bathrooms & kitchen
- Fine construction dust removal
- Large homes & commercial sites
- Multi-room refurbishments
- Tailored quotation
AFTER BUILDERS CLEANING PROCESS
From completed renovation to a move-in ready property.
Every project is different, but the cleaning process always begins after the building work has been completed and the property is ready for a detailed clean.
Inspect the property
The completed rooms, finished surfaces, remaining construction residue and overall condition are reviewed before work begins.
Remove construction dust
Fine dust is removed from walls, woodwork, cupboards, internal glazing, floors and other accessible finished surfaces.
Detailed room cleaning
Kitchens, bathrooms, living spaces and bedrooms are cleaned methodically, with attention given to fixtures, fittings and high-touch surfaces.
Final quality check
The property is reviewed once more to ensure the agreed areas have been completed and the space is ready for occupation or handover.
SERVICE TEAMS / THE AGREED WORK
Cleaning support matched to the rooms, surfaces and handover.
End of tenancy cleaning team
Tenancy handovers organised around the inventory, landlord or letting-agent requirements, appliance additions and the key-return deadline.
Regular domestic cleaning team
Recurring support for kitchens, bathrooms and living spaces, with household priorities agreed for weekly or fortnightly visits.
Window and surface care team
Reachable glazing, frames and sills planned around height, apartment access, neighbouring surfaces and a safe working route.
One-off cleaning team
Single-visit cleaning for moving in, seasonal resets, special occasions or post-renovation tidying, prioritised from the condition on arrival.
The final team and task list are confirmed from the chosen service, property layout, safe access route and available visit time.
VISIT / HANDOVER
Check the result against the agreed task list.
The handover follows the same room and task list agreed before work begins.
AFTER BUILDERS CLEANING FAQ
What to confirm before the post-build clean begins.
The property should be finished, safely accessible and free from active construction work before detailed cleaning starts.
Send photographs of the completed rooms, remaining residue, glazing, floors and any access restrictions.
When is a property ready for after builders cleaning?
The main building, renovation or decorating work should be completed. Contractors, tools, protective coverings and loose construction waste should be removed so the agreed rooms and finished surfaces can be accessed safely.
What information is needed for an accurate quotation?
Confirm the property size, completed rooms, type and amount of residue, access arrangements and any finished surfaces requiring particular care. Recent photographs are especially useful for assessing the likely team size and working time.
What affects the final price?
The quotation depends on floor area, the amount of fine dust, plaster or decorating residue, the number of rooms, internal glazing, cupboards, access conditions and the level of detailed cleaning required.
Are paint, adhesive and silicone marks included?
Light removable marks may be assessed during the visit, but hardened paint, adhesive, silicone and surface damage are not automatically included. Removal must be safe for the material and may require separate testing or specialist work.
Is construction waste removed?
Standard cleaning covers dust and small loose residue from accessible surfaces. Rubble, timber, plasterboard, hazardous materials and larger construction waste should be removed before the cleaning appointment.
Can cleaning take place while builders are still working?
It is usually better to wait until the work is fully completed. Ongoing drilling, sanding, painting or installation can recreate dust and residue, making it difficult to complete an effective final clean.
READY TO PLAN THE FINAL CLEAN?
Move from finished building work to a cleaner, ready-to-use property.
Share the property size, completed rooms, remaining residue and preferred date so the team can confirm availability and prepare a clear quotation.